Portwest PG54 Endurance Glowing Hard Hat Helmet
 Portwest PG54 Endurance Glowing Hard Hat HelmetPortwest PG54 Endurance Glowing Hard Hat Helmet 

Portwest PG54 Endurance Glowing Hard Hat Helmet

 

 

Availability:  

  

In stock


Product Code:  PG54
Brand:  Portwest

Portwest

Portwest PG54 -Vented for Extra Air-Flow - Glows in the Dark

EN 397 +50 degrees/-30 degrees; MM, LD, 440V / EN 50365 CLASS:0

Endurance helmet with 6 points textile harness and wheel ratchet adjustable size 56-63cm. The ABS shell is made with special photo-luminescent additive colour, that accumulates the light in well lit places and release the shining effect in very low or no light conditions – i.e. it glows in the dark. Sold with 4 points chin strap included.

: ABS - Adjustable 56-63cm, 472g

 

Features:

  • CE-CAT III
  • Electrical insulation up to 1000Vac or 1500Vdc (EN 50365)
  • Lateral deformation
  • 6 points textile harness
  • Wheel ratchet size adjustment for easy fitting
  • 7 years shelf life from manufacturing date outlined in product user sheet
  • Chin strap included
  • Compatible with PW47 and PS47 Clip-On Ear Muff
  • Compatible accessories available
EN 397:2012

Mandatory Tests:

  • Impact*: Energy spread to the head form must not exceed 5kN after the fall of an object of 5 kg at 1m high.
  • Penetration*: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull.
  • Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.
  • Impact and Penetration tests* are performed room temperature, at +50 degrees and at -10 degrees.

Optional Tests:

  • Resistance at extreme temperatures: testing impact and penetration are performed at +150 degrees, at -20 degrees or -30 degrees temperatures.
  • Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.
  • Lateral deformation: Protects against lateral compressions. The maximum deformation of the helmet should be less or equal to 40mm (LD)
  • Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM)

EN 50365: 2002 – Insulating helmets for use on low voltage installations

This standard is for helmets used for working live or close to live parts on installations not exceeding 1000 V a.c or 1500 V d.c. Testing to EN 50365 exceeds testing under EN397 for electrical properties.

Marking: double triangle + class + batch number.

Click here to learn more about EN Standards

Basket
Basket: (0) £0.00
BK Safetywear trade
30,000+ SKU's
Fast Reliable Service
Wholesale Prices