Portwest A835 Double Dipped PVC Gauntlet 35 CM

Portwest A835 Double Dipped PVC Gauntlet 35 CM

 

  
 

Product Code:  A835
Brand:  Portwest

Portwest

The A835 is a double dipped PVC gauntlet with sandy palm finish for enhanced grip. Jersey lined for extra wearer comfort. Available in 3 lengths, 27cm, 35cm and 45cm. Treated ro protect against microbial deterioration.

EN 388 EN374 EN 374

EN 420, EN 388, EN 374-1

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

Protective Gloves Against Mechanical Risks

EN388:2003

This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, tearing and puncture. This standard is only applicable in conjunction with EN420 (1 being the minimum performance rating).

Requirements

Performance levels 1-4

D) puncture resistance

Force required to pierce the sample with a standardised punch.

Performance levels 1-4

C) tear resistance

Maximum force required to tear the sample.

Performance levels 1-5

B) Blade cut resistance

Number of cycles required to damage the sample at constant speed

Performance levels 1-4

A) Abrasion resistance

Number of cycles required to damage the sample at constant speed

CHEMICAL TYPES

Protective Gloves: Against Chemicals and Mirco-Organisms

EN374-1:2003

This European standard specifies the requirements for gloves to protect the user against chemicals and/or mirco-organisms and defines terms to used.

EN 374-2:2003

This European standard specifies a test method for the penetration resistance of gloves that protect against chemicals and/or mirco-organisms

EN 374-3:2003

This European Standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact.

EN374 – biohazard

Gloves must prove that they are a effective barrier abundant liquids and mirco-organisms

Performance levels are according to Acceptable Quality Levels (AQL) whereby samples are taken from a batch of gloves and tested during production for pinholes and leaks by either inflation with air or by filling with water.

Gloves must meet st least level 2, to be considered micro-organism resistant.

(Level 1 = AQL 4.0) (Level 2 = AQL 1.5) (Level 3 = AQL 0.65)

Click here to learn more about EN Standards

Basket
Basket: (0) £0.00
BK Safetywear trade
30,000+ SKU's
Fast Reliable Service
Wholesale Prices