NEW
Portwest A725 Safety Impact Glove Lined
 Portwest A725 Safety Impact Glove LinedPortwest A725 Safety Impact Glove Lined 

Portwest A725 Safety Impact Glove Lined

 

  
 

Product Code:  A725
Brand:  Portwest

Portwest

Portwest A725 Safety Impact Glove Lined

The Portwest A725 is a Supreme protection, multi-function glove with advanced impact proof technology. Greatly reduces risk of work injury to the hand. Suited to a wide variety of industries. Oil and water resistant palm. This also comes in an unlined version option, see A724.

EN420, EN388, EN 511, ANSI/ISEA 105-2011

EN 388
Gloves giving protection from mechanical risks


Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

Protective Gloves Against Cold

EN 511:2006

The European standard specific the requirements the test methods for gloves which product against conductive cold down to -50degrees Celsius. This cold can be linked to the climate conditions or an industrial activity.

Requirements

Performance levels 0-1

c) water penetration

Performance levels 1-4

B) Resistance to contract cold

Performance levels 1-4

A) Resistance to convective cold

ANSI/ISEA 105-2011

American National a Standard for Hand Protection

This standard addresses the classification and testing of hand protection for specific performance properties related to chemical and industrials applications. Hand protection includes gloves, mittens, partial gloves, or other items covering the hand or a portion of the hand that are intended to provide protection against or resistance to a specific hazard.

Click here to learn more about EN Standards

Basket
Basket: (0) £0.00
BK Safetywear trade
30,000+ SKU's
Fast Reliable Service
Wholesale Prices